接触作用

在此基础上，应用有限元法对AFM纳米加工中存在于金刚石针尖和被加工材料之间的接触作用机制进行了计算仿真。

Beyond that , the contact mechanism existed between the AFM diamond tip and the material surface is simulated by finite element method . The experimental results prove the FEM 's validity applied in the contact analysis .

语言影响是在语言接触作用下出现的必然结果，必须遵循一定的规律。

The language influence is the certain result under language contact .

在分析中，我们考虑了这个层合结构的层间摩擦、接触作用。

We will include the friction and contact effect in the analysis .

备选阀瓣结构，在球形阀瓣和锥体阀座之间具有线接触作用。

Optional disc configuration which provides line contact between spherical disc and conical body seat .

高压氧对放疗后狗下颌纯钛种植体与骨接触作用的影响

The effect of hyperbaric oxygen adjunctive treatment on osseointegration of titanium implants in irradiated dog mandibles

这类阀瓣具有不同的角度面对阀座，因此具有线接触作用，从而实现最大限度的密封。

Disc has a differential angle front the seat to provide a line contact for maximum sealing .

复合加载下考虑接触作用的地基承载特性数值分析

Numerical analysis on bearing capacity behavior of foundations under combined loading considering the footing / soil interface conditions

模型考虑了土体的弹塑性变形、桩土接触作用以及土体蠕变特性，并对桩-土相互作用的弹塑性和蠕变两种模型进行了对比研究。

The elastic-plastic and creep deformation of the soil and interaction between piles and soil are considered in this numerical model .

在上述效应／靶细胞接触作用过程中，肌动蛋白纤维及T细胞受体均匀分布于γδT表面，不出现在效应／靶细胞接触区域富集现象。

There were distributions of actin filaments and T cell receptors in the cell-cell contact area but they were not enriched .

本文首次在数值模拟中同时考虑纤维间的水动力相互作用（远、近程）和纤维间的直接机械接触作用。

In this simulation , it is the first time to take both of the hydrodynamic interaction and fiber-fiber collision into consideration .

然后着重分析了车辆甲板和气垫船着陆垫接触作用的工况，采用非线性功能强大的MSC。

The contact problem between the landing cushion of the hovercraft and the vehicle deck is analysed with the help of FEM software MSC .

有限元分析中模拟了底板与基础面之间、锚栓垫片与底板之间、以及锚栓与混凝土之间的接触作用。

Contact problems between concrete base surface and column base , bolt nut and neighborhood plate , bolt shank and bolt hole are simulated really .

作者引入了金属橡胶材料内部接触作用模型，利用宏观滑移和微观滑移的概念来描述金属橡胶材料在振动载荷下的减振机理；

Contact model of Metal Rubber material is improved in the analysis , and isolation mechanism of Metal Rubber is characterized by the concepts of'macro-slip'and'mi-cro-slip ' .

本文研究梯度层、三明治层及普通多层膜覆层体受相同表面载荷滑动接触作用下的弹塑性变形情况。

The sliding contacts of gradient layers , sandwich layers and ordinary multi-layers coatings subjected to the same surface load have been investigated under elastic-plastic deformation in this paper .

分析了壁虎与表面间的微尺度粘附接触作用模型，在此基础上设计了一种具有主动控制能力的仿壁虎微纳米粘附阵列。

Based on the analysis of the micro-scale adhesion model between gecko and surface , a novel adhesion array of biomimetic gecko crawling mechanism with active control ability is proposed .

变形区内热接触作用对轧件表面温度有较大影响，温度梯度较大，轧件出变形区后温度梯度逐渐减小，温度分布较均匀。

It has been found that the temperature gradient is great in the deformation , on which the heat conduction has great effects and the temperature gradient is small out the deformation .

该模型用一个弹簧（代表胎体的平移弹性）和稳态模型（代表胎面与路面的接触作用，也称接触模型）串联来近似表达轮胎的动态响应。

In this model , the dynamic response of the tire was expressed approximately by a series connection of a spring ( to represent the translational elasticity ) and a steady-state contact model ( to represent the contact between tire and road surfaces ) .

研究表明：在建模时考虑活塞和曲轴对缸体的接触作用，合理简化缸体结构，准确深入揭示工作过程中缸体的动态强度随时间的变化，为缸体动态结构强度设计提供可靠依据。

Further the studies indicate that the reasonable modeling of the block 's geometrical construction and correct determination of the interaction of piston and crankshaft to engine block can make the transient strength analysis more accurate and offer some reliable suggestions for the dynamic strength design of engine block .

数值分析中考虑了边坡施工过程中坡体开挖卸载的稳定性变化以及支护体与土岩体接触作用的特性，使其能更好的反映边坡支护施工的实际工作性状。

During the analysis process , the stability changes with the excavation unloading of slope mass in the construction process and the properties of the contact effect between the supports and the soil-rock were considered , which could better reflect the actual work situation of construction properties of slope supports .

对接触变质作用条件下碳酸盐岩石CO2气体释放量进行了地球化学模拟计算。

The amount of CO2 releasing is calculated and its relative calculation model is proposed during the contact metamorphism in carbonate rocks .

表面处理对n-GaN上无合金化Ti/Al欧姆接触的作用

Effects of Surface Treatment on Non-alloyed Ti / Al Ohmic Contact of n-GaN

利用砂轮&工件接触滤波器作用可减小振纹振幅，即满足λw<2lc，据此条件可计算减小工件再生波纹的Z′-Vw曲线。附图7幅，参考文献5篇。

Using the filter action of wheel-work contact , when λ w-2xl . condition is satisfied , the amplitude of undulation can be reduced , and the Z ' - Vw curve for reducing regeneration undulation of work piece can be calculated .

本论文的主要内容是根据Petrich和Koch实验观察到的结果，对两纤维直接接触相互作用的过程建立了数学模型，增加了一个与速度相关的阻力，并对这个附加阻力进行了详细阐述。

The major content of the thesis is to simulate the mechanical interaction between two contacting fibers according to the experimental results obtained by Petrich and Koch .

根据接触消毒作用原理，研制了碘树脂个人饮水消毒管（长174mm，重24g）。

A kind of personal drinking water disinfection tube containing iodine resin was developed on the basis of principles of contact disinfection . The tube is 174 mm long , 14 ~ 16 mm in outer diameter and 24g in weight .

接触爆炸作用下钢-混凝土组合梁的波传播分析

Analysis of Wave Propagation in Steel-Concrete Composite Beams under Contact Explosion

表面氢化对SiC/金属接触的作用机理

The Mechanism of Surface Hydrogenation on SiC / Metal Contact

压电&层合梁在非接触电极作用下的二维解析解

The analytical solution of piezoelectric laminated beam under voltage of untouched electrode

滚动接触疲劳作用下的铁轨裂纹萌生与扩展机理

Mechanism on crack initiation and propagation of rail under rolling contact fatigue

滚动接触载荷作用下的铁轨表面裂纹开合状态分析

Opening-closing state analysis on rail surface cracks under rolling-contact loading

水下非接触爆炸作用下潜艇生存概率研究方法分析

Research plan on submarine survival probability in underwater non-contact explosion