功能芯片

  • 网络functional chip
功能芯片功能芯片
  1. Bloch线存储功能芯片专用电路设计

    Specific Electronic Circuit Design of Functional Chips for Bloch Line Memory

  2. MCM多功能芯片集成工艺技术研究

    Study of MCM Technology

  3. 两个系统采用不同的方法来实现电路逻辑,前者采用CPLD而后者采用专用逻辑功能芯片。

    The two systems adopt different methods to realize the logic of circuit , the former uses CPLD and the later uses special IC with logic function .

  4. 多功能芯片ADT14既是一种输出逻辑电平控制信号的多点温度监控器,又是一种输出模拟电压信号的温度传感器,可广泛应用于各种嵌入控制系统中。

    The multi-functional chip ADT14 is a kind of multi-point temperature monitor of outputting logic level control signal , It is also a kind of temperature sensor of outputting simulated voltage signal .

  5. 接着对本系统的主要功能芯片进行了调试,并对整机进行了应用调试和测试。

    Then we debugged and tested main IC and the whole system .

  6. 微流体功能芯片检测装置在流感病毒检测中的初步研究

    The Study of Micro-liquid Biosensor Chip Device for Detecting Detect Influenza Viruses

  7. 光纤陀螺用集成光学多功能芯片的研制

    Integrated optic multifunction chip fabrication for fiber optic gyroscope

  8. 多功能芯片驱动设计与实现

    Design and Implementation of Multifunctional Chip Driver

  9. 结合工程实际,对基于集成光学多功能芯片的数字闭环光纤陀螺中的死区机理进行理论分析,并进行了实验验证。

    Incorporating with engineering applications , the mechanism of the dead band in a digital closed-loop fibre optic gyroscope ( FOG ) was theoretically analysed .

  10. 二次混频主要采用选择功能芯片的方式实现,包括高中频放大器,第二混频器,自动增益控制放大器等。

    The second down-conversion mixer circuit is achieved by function chips , including the high-IF amplifier , the second mixer and the AGC amplifier , etc.

  11. 方法用微流体生物功能芯片微量检测系统检测传染性强、潜在世界大流行危害的流感病毒。

    ( Methods ) The influenza viruse , which is strongly infectious and potentially pandemic infectivity quickly and cause , was detected by Micro-liquid Biosensor Chip System .

  12. 此部分的工作对后续同类功能芯片设计的验证实现提供了一些有效的思路,以提高芯片验证工作的正确性和效率。

    This part provides some efficient ideas for the verification of successive chip designs with the similar function . These ideas would enhance the validity and effectiveness of chip verification .

  13. 光收发模块的设计工作是本论文的主要部分,主要包括设计中所使用的光源器件和功能芯片的选择、主要参数的设置、电路原理图设计、印刷电路板的制作和接口与封装的设计。

    Designing the optical transceiver module is the primary part of this thesis . In this part , the contents contain the choice of chip and component , parameter setting , circuit diagram designing , printed circuit board making and interface and encapsulation designing .

  14. 具有PID自整定温控功能的芯片加热器的研制

    Development of the chip 's heater with PID self-adjustment temperature control function

  15. 基于MEMS的双功能温控芯片的设计与制作

    Design and Fabrication of Double - function Temperature Controlling Chip Based on MEMS Technology

  16. EoS中虚级联及LCAS功能的芯片设计与FPGA实现

    Chip Design and FPGA Implementation of VCAT and LCAS in EoS

  17. 本文介绍了一种采用多功能CPU芯片和模糊控制算法所构成的冰箱模糊控制器的设计方法和基本理论。

    In this paper , the design method and principle of refrigerator controller using advanced multifunctional special CPU chips and fuzzy control algorithm is described .

  18. 通过对24个样品的基因组DNA提取和功能基因芯片技术分析后,发现氮肥的施用对土壤中微生物群落结构和植物生长产生了显著的影响。

    Soil microbial genomic DNA in 24 samples were extracted and analyzed with FGAs . The results showed that adding nitrogenous fertilizer would influence the structures of microbial community and plants in the samples .

  19. 该技术通过简单修改亦可用于其他具有IAP功能的芯片。

    Simply modified , the technology can also be used in other chips with the same IAP function .

  20. 而数字信号处理算法的硬件实现一般来讲有三种方式:用于通用目的可编程DSP芯片;用于特定目的固定功能DSP芯片组和ASIC;

    General speaking , there are 3 ways to implement the digital signal processing algorithms , programming DSP for general purpose , ASIC and DSP chipset with invariable function for special purpose , FPGA that can be programmed by user .

  21. 最后通过实测两款具有FEC数字包封功能的芯片,给出了其在系统传输中的误码率与光信噪比的关系曲线,验证了前向纠错功能。

    Finally , the data which obtained form two FEC digital-wrapping chipsets test shows the relationship between BER and OSNR , and verifies the coding-gain from the FEC technology .

  22. 针对芯片只能在一定温度范围的环境下工作,超出一定的温度范围,芯片会失效等问题,提出了具有PID自整定温度控制功能的芯片加热器的研制。

    In view of the problem that chips can work normally only within the fixed temperature scope and they can not work or are damaged outside the fixed temperature scope , a chip 's heater with PID self-adjustment temperature-control function is proposed in this paper .

  23. 从卫星电视的发展入手,分析了其广泛应用的基于DVB-S标准的卫星接收机系列芯片,并且进行了比较,介绍了最新推出的基于DVB-S2标准的新型多功能接收机芯片。

    Beginning with the development of satellite television , we present and compare a series of typical applied chips for satellite receiver based on DVB-S standard . Then we introduce several new multifunctional receiver chips based on DVB-S2 standard .

  24. 本文介绍多功能集成芯片MC1496/MC1596的工作原理,以及用作平衡调制器使用时,其电路特点、使用技巧等应用技术。

    Abstract : In this paper , principle of Multifunctional IC MC1496 / MC1596 is introduced . When used as a balance modulator , circuit characteristics and use technique is specified .

  25. 具有图像缩放功能的芯片可用于液晶电视和其它需要图像缩放的各类数字显示器中。

    The chip with image scaling function will be used in LCD TV or various other digital display devices .

  26. 这使得完成相同功能的芯片面积越来越小,单颗芯片成本越来越低。

    This makes the chip to complete the same function as the area is getting smaller and smaller , the cost of a single chip is becoming less and less .

  27. 在随后的章节里,硬件部分介绍了各功能模块芯片的选型和提高系统性能的措施,并详细分析和说明了各模块电路图的原理。

    In subsequent chapters , hardware part introduces the selection of function modules of the chip and the measures of improving system performance , and makes a detailed analysis and explanation of the circuit principle of each module .

  28. SoCEwebstep采用SoC技术,将控制器的大部分功能在单个芯片上实现,具有功耗低、体积小的优点;

    SoC_Eweb_step implements the most function of motion controllers on a chip by using system-on-chip technology and achieve the advantage in power consumption and size .

  29. 在已选器件基础上,将整个控制系统程序按功能分为芯片初始化模块、红绿灯循环显示模块、中断处理模块、LED驱动模块、读时钟及写时钟模块、键盘及显示模块。

    The software of system can divide into : initialization module , circulative display module , interrupting module , LED driver module , read clock and write clock module , keyboard and display module .

  30. 一种带有IrDA功能的UART芯片的设计研究

    Design of a UART with IrDA function