凝汽器

采用淡水／海水冷却的N－2000型凝汽器的设计比较及其应用

Design Comparison of N-2000 Type Condenser for Fresh And Sea Water Cooling And Their Applications

应用自组织特征映射（SOM）神经网络实现凝汽器的故障诊断。

A method based on self-organizing neural network is applied to realize fault diagnosis of condenser .

一种改进型BP网络算法在凝汽器故障诊断中的应用

Application of An Improved BP Net Calculation to the Fault Diagnosis of Condensers

4111－K2E6凝汽器换管改造

Replacement of 4111 K 2E 6 condenser tubes

因此，ACC凝汽器冷却面积的合适选取，将对汽轮机的带负荷能力有着至关重要的作用。

So suitable selection of ACC cooling area is essential to output of the turbine .

空冷系统的ACC凝汽器冷却能力大小，对汽机真空有很大的影响。

The cooling capability of Air cooling condenser has very great influence on vacuum of steam turbine .

以计算流体力学软件FLUENT为平台，对凝汽器喉部雾化补水进行了数值研究。

As a platform to computational fluid dynamics software FLUENT , proceeding numerical simulation research on the replenishment atomization on condenser throat .

基于RCM定性分析和维修性分析，确定了电站凝汽器合理的维修方式。

On the basis of RCM qualitative and maintainability analysis a rational maintenance mode is determined for power plant condensers .

本文通过ACC凝汽器性能试验和冷却面积核算，为凝汽器的运行提供了理论指导。

By ACC device performance test and cooling area calculation , This text has offered the theoretical direction to the running of condenser .

600MW汽轮发电机组单壳体凝汽器研究

Studies on Single-shell Condenser in 600 MW Turbine Unit

300MW机组提高凝汽器运行真空的措施

Measures for enhancing vacuum in operation of condenser

本文首次尝试将数据预处理技术应用到凝汽器故障模式识别的数据挖掘过程中，开发了一个为凝汽器故障模式识别BP神经网络算法作数据准备的数据预处理系统。

In the paper , data preprocessing is firstly applied to data mining process about the condenser fault pattern recognition , and developed a data preprocessing systems for data preparation of the condenser fault pattern recognition BP networks .

某电厂600MW机组凝汽器的组合安装

Combined Installation of 600 MW Unit Condenser

国产引进型300MW火电机组凝汽器铜管一次性镀膜技术的应用

One-shot Film Galvanization Technique Applied to Cu-Alloy Condenser Tubes of licensed Type 300 MW Generating Sets

300MW机组凝汽器的动态数学模型及其仿真

The Dynamic Mathematical Mode and Its Simulation of the Condenser of 300 MW Turbine - generator Unit

300MW汽轮机凝汽器喉部出口流场的三维数值模拟

Three-dimensional Numerical Simulation of the Outlet Flow Field of the 300 MW Steam Turbine 's Condenser Throat

大同二电厂200MW机组凝汽器的化学清洗

The chemical cleaning of 200 MW unit condenser for Datong No.2 power plant

多压凝汽器在200MW汽轮机组中的应用

The Use of a Multi-pressure Condenser in a 200 MW Steam Turbine Unit

TEPEE排管技术在凝汽器改造中的应用

Application of TEPEE tube laying technology in the condenser reform

N-11220-1型凝汽器的热力性能分析与改造措施探讨

Study of Thermal Performance of the N-11220-1 Power Plant Condenser and Retrofit Methods

125MW机组除氧器和凝汽器水位控制系统的应用

The Application of the Deaerator and Condenser Level Control System

以某200MW直接空冷机组为例，通过仿真模型计算出不同风速、风温和排汽量下凝汽器冷端系统特性曲线；

Taken A200MW unit as an example , the unit 's cold end system characteristic curves were drawn .

本文利用Visualc++建立了基于模糊BP网络的核动力装置凝汽器故障诊断专家系统，该故障诊断专家系统采用人机交互界面，具有界面友好，操作简单等特点。

With Visual C + + , an expert system for the condenser fault diagnosis in a nuclear power installation was constructed based on fuzzy back-propagation neural network . The expert system for the condenser fault diagnosis adopt mutual interface between man and computer , interface is friendly and simple .

N-7100型和N-17800型凝汽器钛管泄漏原因及预防对策

Cause Analysis and Countermeasures of Titanium-Duct Leakage of N - 7100 and N-17800 Condensers

利用自行开发的最新凝汽器数值模拟软件对N-11220-1型电站凝汽器热力性能进行了数值分析并指出其存在的问题。

Thermal performance of the N-11220-1 power plant condenser is numerically studied using the computer program developed by author .

基于凝汽器系统的历史数据，以凝汽器系统的真空变化情况为主题，建立了基于多维数据模型的数据立方体，利用OLAP进行了分析。

On the basis of the historical data of condenser system , with the vacuum variation condition of condenser system as the subject , the multidimensional data model based data cube is set up , and the analysis is conducted using OLAP .

电厂采用EJA系列智能变送器检测锅炉给水流量、加热器水位、抽汽压力、凝汽器真空等；

It talks about the application of EJA series transmitter in measurement of boiler feedwater flow , heater water level , extraction steam pressure , condenser vacuum etc.

荆门热电厂4号机凝汽器铜管在大修检查中发现甲、乙、丙三侧水进口端100mm左右管段有不均匀的铜基体裸露腐蚀，部分铜管中部也发生沉积物下腐蚀。

The corrosion was found at a , b , c inlet end of condenser tubes in overhaul . The corrosion under deposit occurred on the middle part of some copper tubes .

用交流阻抗、恒电位阶跃、极化曲线、线性极化等四种电化学方法评价了MBT预膜处理前后凝汽器铜管的耐腐蚀性。

A evaluation on corrosion resistent performance of copper tube before and after MBT filming treatment has been carried ont using 4 electro-chemical methods AC impedance , constant potential step , polarization curve and linear polarization .

采用数值模拟方法计算与比较了一台300MW汽轮机对分式凝汽器在半负荷工况时冷却水管全部工作和一半冷却水管投入工作两种运行方式下的汽相流动与传热特性。

The off-design steam flow and heat transfer behaviours of a 300 MW power plant condenser operating with either all or one half cooling water tubes at half-load conditions are numerically analysed and compared .