共混

文中分别对开发CETP的三种主要方法：共混，合金化及增强、填充复合化的发展现状，制备，进展和工业化开发进行了详细讨论。

There are 3 main methods for the exploitation of CETP : alloying , blending and composite . The advance , manufacturing technology , present situation , new trend and industrial development of alloy , blend and reinforced or filled thermoplastics are discussed in detail in this paper .

在此基础上，以硫酸钠为凝固剂，对胶原-PVA共混溶液进行湿法纺丝，制备了胶原-PVA复合纤维

Thesolution of collagen-PVA was wet spined with the sodium sulfate as coagulant and collagen-PVA composite fibers were prepared .

PVC/PP共混体系的X射线能谱微区分析

The X-Ray Microanalysis of PVC / PP Polymer Blends

PET分子量对PET/PC共混体系高压结晶行为的影响

Effect of PET molecular weight on high-pressure crystallization behaviours of PET / PC blends

PET/PBT反应性共混酯交换动力学及其MonteCarlo模拟

The Transesterification Kinetics and its Monte Carlo Simulation of PET / PBT

利用扫描电子显微镜（SEM）对共混及掺混材料的界面形态进行了观察，并讨论了界面形态与力学性能的关系。

The relationship between interfacial morphology and mechanical properties of polymer blends is discussed .

聚丙烯酸酯乳液和硅酸钠处理木质素与PVC的共混

Blending of PVC and Lignin Treated with Sodium Silicate and Emulsion of Polyacrylate

PP的熔融指数越小，共混体的性能越好。

The lower the melt index , the better the properties of the blend .

采用机械共混法得到了Bi2Te3/聚苯胺无机有机混杂材料。

Bi2Te3 / polyaniline composites were prepared by mechanical blending .

离聚体与PP共混，在拉伸强度方面呈现协同效应。

A synergistic effect with respect to tensile strength occurred in ionomer / PP blend .

SBR／PP共混物的结晶行为和性能

Crystallization behavior and properties of sbr / pp blends

结果表明，共混溶液的浓度和pH对共混凝胶的质构特性均有较大的影响；

The result showed that concentration and pH value had great impact on the textural properties of the mixed gel ;

研究了PAN／PU共混物的熔融纺丝工艺。

The melt-spinning technology of PAN / PU blending polymer was also studied .

尼龙1010／PP－g－MAH共混物热行为及力学性能研究

A Study on Thermal Behavior and Mechanical Properties of Nylon-1010 / PP-g-MAH Blend Systems

通过共混复合的方法制备出具有抗静电性能的聚丙烯（PP）。

Antistatic polypropylene ( PP ) was prepared by means of blending PP with antistatic agent .

PE、EVA及LDPE／EVA共混物辐照特性的研究

Studies on the Radiation Behavior of PE , EVA and LDPE / EVA Blends

探讨了HDPE及共混体系形状回复的机理；

The shape recovery mechanism of HDPE and blended system is discussed ;

共混挤出法制备HDPE阻隔复合材料的研究

Study of HDPE Barrier Composite Material by Blending Extrude Method

用DSC结晶曲线研究了共混物、Al（OH）3/PP和改性Al（OH）3/PP复合材料的非等温结晶行为。

The crystallization behavior of PP blends and Al ( OH ) _3 / PP composites were investigated with DSC .

研究了四种不同粒径PP／PA6微粉制备共混物的结构与性能，在2个4%含量下，共混物拉伸强度随粒径增大而增加；

The structure and properties of SBS / different plastic powder blends were studied .

小角激光散射研究PP／POE共混体系相分散行为

Study on Dispersing Behavior of PP / POE Blends by Small-Angle Laser Light Scattering

采用熔融共混法制备了纳米锡酸锌/丙烯腈-丁二烯-苯乙烯共聚物（ABS）/聚氯乙烯（PVC）复合材料。

The nano-zinc stannate / ABS / PVC composites was prepared by melting blend - ing method .

用液晶PET（40）/PHB（60）共聚酯对PET共混改性的研究

Study on the blend modification of pet by liquid crystalline pet ( 40 ) / phb ( 60 ) copolyester

当PVC与CR共混时，PVC热稳定性受CR硫化体系的影响。

When PVC is blended with CR , thermal stability of PVC is influenced by the vulcanization systems of CR.

用毛细管流变仪和DSC方法研究了马来酸酐接枝改性的聚丙烯（PPgMA）对PP/PPgMA共混体系流变性和热行为的影响。

The effect of PP-g-MA on rheological behaviour and thermal properties has been studied with capillary rheometer and DSC method .

以高直链玉米淀粉和PVA为原料，共混制备塑料薄膜。

In this study , high-amylose corn starch and PVA were used as experimental materials .

用J积分的方法表征了PP/PC共混物的断裂韧性。

J integral principle was used to characterized the fracture toughness of PP / PC blends .

尽管共混物含30份的PA，但仍具有优良的耐吸水性；

EPDM / PA blend , including 30 phr PA , gained excellent water resistant property .

将功能化聚乙烯蜡/有机蒙脱土插层复合母粒与聚丙烯（PP）共混，制备了有机蒙脱土填充的聚丙烯。

Organic montmorillonite filled polypropylene was prepared by blending functionalized polyethylene wax organic montmorillonite intercalated master batches with polypropylene .

酚醛树脂与CPE弹性体共混增韧的研究

Study on Toughening of PF Resin by Blending with CPE Elastomer