Toughener

The curing characteristics and optimum blending ration for the toughener were discussed .

讨论了该增韧剂的固化特性和最佳掺合比例。

DMA results show that there is a good compatibility between nylon 1212 and toughener .

尼龙1212和增韧剂具有较好的相容性。

For the standard samples , 5wt % toughener can play a toughening effect .

对标准样条，只需要添加5wt%增韧剂，就能起到增韧作用。

The effects of toughener and filler on shearing strength and impact strength of epoxy adhesives were studied .

研究增韧剂、填料对环氧树脂胶粘剂剪切强度和冲击强度性能的影响。

Polypropylene was modified by using smelted ash powder / EPDM rubber blends as toughener .

将粉煤灰与三元乙丙橡胶（EPDM）混炼后与聚丙烯树脂熔融共混进行增韧改性。

Toughening mechanism of Toughener UF-811 for PVC was described .

介绍一种新型PVC增韧剂UF-811的增韧机理。

In the present article , acrylonitrile-butadiene-styrene copolymer ( ABS ) was used as toughener of PA6 .

本课题采用核壳改性剂丙烯腈-丁二烯-苯乙烯共聚物（ABS）对PA6进行增韧。

The effect of compatilizer and toughener on the properties of modified PA6 / PA66 is studied .

研究了相容剂、增韧剂对改性尼龙6/尼龙66合金性能的影响。

DOP acted either plasticizer or toughener to PVC , but it decreased the efficiency of ENR toughened PVC .

DOP既可增塑也可增韧，但DOP的加入将影响ENR对PVC的增韧作用；

Core-shell modifier can be prepared with controled structure , steady particle size and higher toughening efficiency and which has been used as toughener of PA6 .

核壳结构增韧剂具有结构可控，粒子尺寸稳定，增韧效率高等优点，因此是PA6常用的增韧剂。

The reinforcing and toughening mechanism of poly ( lactic acid ) composite filled by talcum powder or diatomite combined with toughener compound was investigated .

研究了滑石粉和硅藻土与增韧复配体系并用增韧聚乳酸（PLA）复合材料的机理。

Using PP as matrix resin , POE as toughener , activated talc as reinforcer , compound for back cover of refrigerator compressor is prepared .

以聚丙烯为基料，POE为增韧剂，活化滑石粉为增强剂，研制出了冰箱压缩机后罩专用料。

With the addition of toughener and compatilizer notched impact strength of the nanocomposites were highly improved , while the tensile strength and flexural strength were almost invariable .

增韧剂及增容剂的引入都较大程度地提高了复合材料的缺口冲击强度，而拉伸强度和弯曲强度基本不变；

A method of improving epoxy resin damping property was introduced by using random car-boxy nitrile rubber as toughener and triethanol amine , low molecular weight polyamides and so on as hardening agent .

介绍以无规羧基丁腈橡胶为增韧剂，用三乙醇胺、低分子量聚酰胺等为固化剂改善环氧树脂阻尼性能的方法。

With proper homopolymerized and copolymerized PP as base resins , EPDM as toughener , self-made inorganic filler A as filler , compounds for bumper with desirable properties were prepared .

采用配比合适的均聚和共聚PP为基础树脂，以EPDM为增韧剂，自制无机填充料A为填料制得性能符合要求的保险杠料。

The volume shrinkage ratio and then the interal stress can be reduced by reducing the concentration of functional groups , adding polymer toughener and inorganic powder filler , improving curing techniqes , and so on .

工艺上可通过降低官能团浓度、加入高分子增韧剂和无机粉状填料、改进固化工艺等方法来减少体积收缩率，进而减少内应力。

With polyolefin elastomer as toughener and nano-CaCO 3 as reinforcer , PP / POE / nano-CaCO 3 was prepared by melting blend in a twin-screw extruder .

以聚烯烃弹性体POE（乙烯辛烯共聚物）为增韧剂，以纳米CaCO3为增强剂，利用双螺杆挤出机，通过熔融共混工艺制备了聚丙烯（PP）/POE/无机纳米粒子复合材料。

PC / PBT blends with no toughener addition had very poor mechanical properties . 2 PC / ABS and PC / ABS-g-GMA blends were partially miscible . The toughening effect was different when the samples with different thickness .

2PC/ABS与PC/ABS-g-GMA共混体系均为部分相容体系，样条的厚度不同，增韧效果不同。

With poly ( ethylene terephthalate )( PET ) as the matrix , methylmethacrylate / co / acrylonitrile / co / butadiene / styrene copolymer ( MABS ) as the toughener , PET / MABS / MMT nanocomposites were prepared by melt blend in a co-rotating twin screw extruder .

以聚对苯二甲酸乙二酯（PET）为基体，以（甲基丙烯酸甲酯/丙烯腈/丁二烯/苯乙烯）共聚物为增韧剂，采用熔融共混法制备了PET/蒙脱土纳米复合材料。