非铁金属

其中有的方法不仅适用于铸钢件，也适用非铁金属。

Some of these methods are applied not only to steel castings but also to nonferrous metals .

不能撤退的一切宝贵财产，包括非铁金属、粮食和油料，务必销毁。

All valuable property including nonferrous metals , grain , and fuel which cannot be withdrawn must without fail be destroyed .

聚晶金刚石复合片（PolycrystallineDiamondCompact）已广泛应用于地质钻探、非铁金属及合金、硬质合金、石墨、塑料、橡胶、陶瓷、木材等材料的切削加工等用途中。

Polycrystalline Diamond Compact ( PDC ) has been widely used in earth drilling , cutting of various materials such as non-ferrous metal and their alloy , hard metal alloy , graphite , plastics , rubber , ceramics . It 's faced with polycrystalline diamond sintered from diamond powder .

是一款理想的锻造炉，非铁金属熔炉炉头。

Ideal for forging furnaces , melting of non-ferrous metals .

非铁金属，有色金属及合金

Non-ferrous metals & alloys Determination of iron content in alloy and powder

石膏模非铁金属精密铸造技术

Non-ferrous precise casting technology of gypsum model

涡流式非铁金属选别机

Vortex Non - ferrous Separator

铣削机板和条钢和非铁金属焊接边型材准备！

Milling machines for preparation of welding edge profiles on plates and strips of steel and non-ferrous-metals !

而在有色金属下降，事实上，是也远低于非铁金属。

And the decline in ferrous metals , in fact , is also far less than that of non-ferrous metals .

稀土永磁辊式涡电流分选机（PMRECS）是一种近几年来发展起来的分选和回收非铁金属废料的新设备。

Roll type permanent magnetic RE eddy current separator is a newly-developed equipment for separating and recovering non-ferrous metal waste material .

对硬钢、白铸铁、非铁金属、塑料、合成材料等进行钻孔、深钻孔、车削、铣削等加工的牌号。

Drilling , gun-drilling , turning , milling of hardened steel , white cast iron , non-iron metals , plastics an synthetics .

是一种外观为澄清淡黄色，为生物稳定性高之切削油，适用在所有铁金属及大部分非铁金属的中度加工及研磨。

Daimosyn B-525 a light yellow bio stable synthetic cutting fluid used in easy to medium severe grinding and machining of ferrous metals .

介绍了涡流式非铁金属选别机的工作原理、磁选系统的设计及结构设计中的关键因素。

The paper introduces vortex non-ferrous separator about its working principle , design to the magnetic separating system and the key factors among structure design .

也可用于抛光条、抛光浆、油漆表面、亚克力、不锈钢镜面、非铁金属、玉石，大理石、花冈岩、水晶、光学玻璃。

It can also be used for burnishing stick , rubbing paste , lacquer top finish , stainless steel mirror , nonferrous metal , jade , marble , granite , crystal and optical glass .

适用范围：锌合金、铝合金、铜合金、非铁金属、不锈钢精密铸件、钢、铁铸件的表面清理、光饰、强化。

Application Range : Applied to surface cleaning , polishing , and intensity of zinc alloy , aluminum alloy , cooper alloy , non-ferrous metal , exact stainless steel casting , steel or iron casting .

人造金刚石聚晶具有接近金刚石单晶的硬度和耐磨性，其韧性、可加工性和价格等方面具有明显优势，在加工非铁金属和非金属材料中得到越来越广泛的应用。

The use of polycrystalline diamond in nonferrous and non-metal materials is increasing recent years due to its obvious advantages of the hardness close to mono crystal diamond , abrasion resistance property , toughness , easy to process and low price .

金属材料可分为黑色的和非铁的金属和合金。

Metallic materials are divided into ferrous and non-ferrous metal and alloys .

非铁磁性金属薄层涡流测厚法

Measurement of the Thickness of Non-ferromagnetic Metal Sheets by Eddy Current Testing

许多非铁类金属制造商计划提高产量，期望在接下来的几个月中增加收入。

Many nonferrous metal product makers are set to expand their output and expected to increase earnings over the coming months .

此原理已应用于中国计量科学研究院的《非铁磁金属电导率基准》的建立，不确定度达到0.06%，其技术指标处于国际领先水平。

This new principle has been applied to the establishment of the NIM conductivity standards for nonferrous metals . The total uncertainty is about 0.06 %

对于非铁磁性金属材料，这种相位滞后非常微弱，而且由于趋肤效应和涡流的影响，阻尼作用导致的相位滞后难以观测。

For the non-ferromagnetic metal , the phase-lag is very faint , and owing to the influence of conductor skin effect and eddy current , it can hardly be detected .

实验结果表明，探测器的振荡频率在5.0～6.6kHz时灵敏度较高，铁磁性金属与非铁磁性金属的目标特性有明显区别。

Experimental results indicate that there is remarkable target characteristics difference between ferromagnetic metal and non ferromagnetic metal , and the designed detector is of good sensitivity in the oscillatory frequency range of 5.0 ~ 6.6 kHz .

本文将简扼叙述合金、镁合金、铜合金等非铁及轻金属之生产技术及应用领域。

This article will illustrate the production technology and application fields of non-ferrous and light metals , for example , aluminum alloy 、 magnesium alloy 、 copper alloy etc.

金刚石薄膜的一个重要用途是用做加工非金属、非铁金属和合金的刀具涂层。

One of the important applications of diamond coatings is as cutting tools for nonmetals , nonferrous metals and alloys .