通道制

我国股票发行通道制与保荐制下IPO定价效率的比较研究

Comparative Research about the Efficiency of IPO Pricing Between the Channel System and Sponsors System

蛇形通道制备半固态铝合金浆料的研究

Preparation of Semi-solid Aluminum Alloy Slurry by a Serpentine Pouring Channel Process

2001年4月通道制推出，标志着核准制正式实行。

April 2001 channel system launched , the formal approving system implemented .

电纺聚合物纤维在微/纳流体通道制备技术方面的应用。

The application of electrospun polymeric micro / nanofiber in micro / nanofluidic channel fabrication .

保荐制度在我国是一个新兴的制度，它是连接证券发行上市制度中的通道制和未来的注册制的过渡性制度。

Sponsorship system is a newly established mechanism in China and it is a connection between the " xhannel system " and the future " registration system " for issuance of securities .

2005年1月1日运行了三年多的证券发行通道制被正式废止，保荐机构推荐企业上市的保荐人制度开始全面实施。

Passage system for the listing of securities which had been run for three years was abolished formally on January 1 , 2005 . Sponsor system that listing of enterprise is recommended by sponsor firms began to implement in an all-round way .

尽管新股发行审核制度从地方审批制、额度管理制、指标管理制、通道制和保荐制的不断演进，但是作为新股发行审核制度的重要组成部分&发审委制度从始至终都存在。

Although the stock issuing system from the " local approval " system ," line manage-ment "," indicators management "," channel system " to " recommendation system ", but the issuance examination committee system is an important part of the stock issuing system from beginning to end there .

在T型微通道内制备固体脂质纳米粒（SLN）的实验研究

Preparation of Solid Lipid Nanoparticles in T-Shaped Junction Microchannels

等径弯曲通道变形制备块体超细晶铜的腐蚀性能研究

Investigation on Corrosion Behavior of Ultra-fine Grained Cu Processed by Equal Channel Angular Pressing

现有的多通道滤光片制备方法存在工艺繁琐、成品率低等缺陷。

Existing fabrication process of multi-channel optical thin film filter has drawbacks of complexity and low yield rate .

在这篇文章中，主要介绍了用三对最大的和非最大两粒子纠缠态作为量子通道远程制备一个三粒子纠缠态的方案。

With three pairs of entangled particles as the quantum channel , we present a scheme for preparing remotely a three-particle entangled state .

随之而发展起来的电化学腐蚀技术具有高深宽比和成本低廉的优点，在硅微通道的制备过程中被广泛使用。

With the development , electrochemical etching what has the advantages of high aspect ratio and low cost has been widely uesd in process of silicon micro-channels plate . So , the processing and cleaning of the flat technology has flourished after the electrochemical etching of silicon micro-channel .

抗胚胎小鼠心肌α1D钙离子通道抗体的制备及鉴定

Preparation and Identification of Polyclonal Antibody of Mouse Embryonic Cardiac Calcium Channel α 1D

本文介绍了Pt电阻温度传感器批量测试系统信号调理模块的设计，该信号调理模块采用了多通道四线制设计，使用多路电子开关实现了温度传感器的多通道测量。

The design of signal adjusting module of Pt-resistance temperature sensor testing system is introduced in this paper . And the signal-adjusting module adopts multichannel and four-wire method . It used multichannel electronic switches to realize the multiplexer testing of the Pt-resistance temperature sensor .

等通道转角挤出制备自增强高密度聚乙烯

Self-reinforced high-density polyethylene prepared via equal channel angular extrusion

利用微通道反应器制备纳米粒子的最新研究进展

Recent advances in preparation of nanoparticles using microchannel reactors

等通道转角挤压制备自增强高密度聚乙烯的结构与性能研究

Structure and Properties of Self-reinforced High-density Polyethylene Prepared via Equal Channel Angular Extrusion

离子注入通道波导的制备和分析

Fabrication and Analysis of Ion-implantation Channel Wavequide

聚D-谷氨酸甲酯与聚甲基丙烯酸丁酯共混通道膜的制备和它的渗透性

Preparation of blended channel membranes from poly γ - methyl D-glutamate with poly butyl methacrylate and their permeation properties

最后，利用两粒子纠缠对为量子通道，远程制备单粒子态，以及远程制备纠缠态。

Finally , we study the remote state preparation of one particle state , and the remote preparation of two-particle entangled state .

本文报告了以多孔玻璃为基材的微通道板的制备及其二次电子发射特性的测量结果。

The paper reports the fabrication of the MCP based on the porous glass ( ceramics ) and the measurement of secondary electron emission characteristic of the MCP .

建立了微流控芯片中的纳滤膜集成方法，设计并制作了玻璃微流控芯片，通过界面聚合法在芯片微通道中原位制备纳滤膜。

Set up the integration method of nanofiltration membrane in microfluidic chip , and design and fabricate glass microfluidic chip , and nanofiltration membranes were in-situ prepared by interfacial polymerization in micro-channel .

传质模型的建立为微通道内SLN的制备及微通道设计提供了依据。

The mechanisms of mass transfer provide a reference for the the preparation of SLN and the design of microchannel apparatus .

微通道反应器中制备沸石分子筛及生物柴油的研究

Synthesis of Zeolites and Biodiesel in Microchannel Reactors

等通道热挤压变形制备奥氏体不锈钢纳米级组织

Formation of Nanocrystalline Structure in Austenite Stainless Steel by Hot Equal Channel Angular Pressing

16通道微型集成滤光片制备技术的研究

Study of fabrication of 16-channel micro integrated filter

螺旋通道型旋转床制备纳米氢氧化铝的研究

Preparation of Nano-Aluminum Hydroxide in Rotating Bed with Helix Channels by High-Gravity Reactive Precipitation

微通道内催化剂的制备

The preparation of Catalyst in Microchannels

等通道转角挤压工艺制备超细化合金的研究与进展

Study on ECAP for ultra-fine alloy

然后通过单因素实验，考察在Z-型微通道反应器中制备生物柴油时各因素（醇油摩尔比、温度、催化剂含量和停留时间）对生物柴油收率的影响。

Then the effect of molar ratio of methanol to oil . temperature , catalyst content and residence time on the yield of biodiesel were studied using the " Z " - microreactor .