辊涂

  • 网络roll coating;roller coating;roller painting
辊涂辊涂
  1. 铝塑复合板用铝卷材的辊涂

    Roller coating on aluminum coil for aluminum-plastic board

  2. 依据锂离子电池浆料流变特性选用特殊结构的辊涂工艺进行极片均匀涂布。

    The special roller coating technology for electrode coating was chosen on the basis of rheologic property of the slurries .

  3. UV光敏干燥辊涂生产线。

    UV coated photosensitive dry roll production lines .

  4. 介绍了预涂卷材涂料涂装时,前处理辊涂方式、涂装线的线速、炉温、板温(PMT)及膜厚等涂装参数对涂膜性能的影响。

    The influence of pretreatment , roll coating model , speed of coil coater line , oven temperature , PMT and film thickness on performance of coatings film is described .

  5. 实验结果表明:采用辊涂法预处理液C50可获得耐蚀性、涂装性及加工性均优的合金化热镀锌有机涂层钢板。

    The results of study show that : if the rolling chemical pretreatment solution C50 is used , the products with both high corrosion resistance and good bonding can be obtained .

  6. 采用辊涂的方式将聚丙烯酸(PAA)、聚丙烯酸锂(PLiAA)和聚丙烯酸钠(PNaAA)溶液涂覆在铝箔上,通过控制不同的烘干时间和温度以获得不同结晶度的涂膜。

    The solution of poly ( acrylic acid )( PAA ), poly ( lithium acrylate )( PLiAA ) and poly ( sodium acrylate )( PNaAA ) were coated on aluminium foils by roll coating method . The coatings film with different crystallinity were obtained by varying baking time and temperature .

  7. 水性辊涂实色底漆的配方设计及应用

    Formulation Design and Application of Waterborne Roller Coating Solid Color Primer

  8. 辊涂涂料流平性测试仪和测试方法

    Testing instrument and method for levelling of roller coating paint

  9. 刷涂或辊涂时建议使用干净的中刚性毛刷或中等绒毛辊子。

    Use a clean , medium bristle brush or medium nap roller .

  10. 施工方式:刷涂、辊涂或喷涂。

    APPLICATION METHOD : brush , roller , conventional spray or airless spray .

  11. 提出一种测试辊涂涂料流平性的新方法。

    A new method for testing the levelling of roller coating paint was proposed .

  12. 硅钢片绝缘涂层的边缘增厚与辊涂机的改进

    The Edge-thickening of Silicon-steel Sheet Insulation Coating and the Improvement of the Roller Machine

  13. 法塔亨特公司辊涂技术在镀锌机组后处理段的应用

    Post galvanizing treatment utilizing roll coating technology

  14. 小面积施工使用刷涂或辊涂。

    Brush or roller for small areas .

  15. 刷涂或辊涂只用于小面积施工或修补,且避免重涂。

    Brush or roller for small areas and touch-up only . Avoid re-brushing and re-rolling .

  16. 新型装饰材料&辊涂花纹蜂窝板

    New decoration material-roller coated pattern honeycomb panel

  17. 本课题制备抗菌涂料,将改性涂料辊涂于塑料表面,得到表面抗菌的抗菌塑料。

    In this study , antibacterial dope is painted on the surface of plastic to solve above problem .

  18. 本公司可为新开发印刷、辊涂生产线的客户专业设计和专业指导。

    This company can for the new development of printing , a coil coating line design and professional customers professional guidance .

  19. 合金化热镀锌板辊涂法无污染铬酸盐处理研究

    STUDY OF CHROMATING ON THE SURFACE OF Zn-Fe ALLOY SHEET BY ROLLING WITHOUT RINSING Alloying Treatment on Zinc Plating of Hot-dip Plated Steel

  20. 此技术文件提供通过辊涂方式被涂布至钢带上的有机涂料或油漆的基本信息。

    This technical bulletin provides general information about the types of organic coatings or finishes that can be applied to metal strip by coil coating .

  21. 文中从设备角度出发,对预处理均匀性、辊涂均匀性、固化制度等影响因素进行了探讨。

    From the equipment point of view a discussion is made on the factors that affect the evenness of pretreated layer and coating layer and solidification system .

  22. 列举了影响卷钢彩涂产品质量的主要因素,并详细介绍了预处理、辊涂、烘烤固化工艺、试验参数和结果。

    The main factors influencing the quality of colour coil steel coating are cited . The pretreatment , roller coating , baking and curing processes , experimental parameters and its results are described in detail .

  23. 研究了逆涂过程中辊间涂液分布的规律。

    The law of the liquid distribution between two rolls in reverse roll coating has been studied .

  24. 使用前应在辊棒表面均匀涂上耐火涂层。

    You must tip roller with refractory coating before use .

  25. 涂布辊&在辊涂过程中,涂装涂料,转换涂料,和其它液体涂料到运动的钢带的辊子。

    Applicator roll-in roll coating , the roll that applies the paint , conversion coating , or other liquid coating to the moving strip of metal .

  26. 转移辊-梳毛机上的过渡辊&在辊涂过程中,此辊转换涂料或其它液体涂布物从浸料辊到涂布辊上。

    Transfer roll in roll coating , the roll that moves paint , conversion coating , or other liquid coating from the pick-up roll to the applicator roll .

  27. 四大辊车间是京山轻机的核心部件生产加工车间,瓦楞辊,压力辊,涂胶辊和匀胶辊均在这里加工成型。

    Four major rolls workshop is the core machining workshop of corrugated rolls , pressure rolls , glue rolls and doctor rolls .