轮胎尺寸

  • 网络tire size;TYRE SIZE;Wheels size
轮胎尺寸轮胎尺寸
  1. 如果轮胎尺寸不对,按回车键,然后选择正确尺寸。

    If the tire size is incorrect , depress the Enter key and then select the correct size .

  2. 汽车动力转向系统匹配时应充分考虑轮胎的静态转向力矩,它随轮胎尺寸的增大而增大;

    The static steering resisting moment , which increased with the tire size , should have been taken into account in the design of power-steering system of truck ;

  3. DSP胎体轮胎尺寸稳定性好,均匀性好,但操纵性和胎面耐磨性比改性锦纶66胎体轮胎稍差。

    And DSP cord tire had better dimension stability and uniformity , but somewhat poorer handling quality and tread life .

  4. 航空轮胎尺寸选取

    Selection of dimension of aviation tire

  5. 使用此菜单项,可以依照轮胎尺寸对导航模块进行编码。

    The navigation module can be coded in accordance with the wheel size using this menu item .

  6. 根据轮胎尺寸、材料性质和工作条件,对滚动轮胎进行了合理假设,建立了滚动轮胎热平衡状态下的简化传热数学模型。

    Based on tire dimensions , material properties , and operating conditions , a reasonable supposition was put forward for a rolling tire , and a concise mathematical model was proposed on heat equilibrium state in a rolling tire in this paper .

  7. 采取的主要措施是:减小轮胎外缘尺寸,外直径由808mm减至798mm,断面宽由198mm减至195mm;

    The main measures are as follows : the overall diameter is reduced from 808 mm to 798 mm and the cross section width is reduced from 198 mm to 195 mm ;

  8. 废旧轮胎全尺寸火灾实验研究

    Behavior of Abandoned-tyres in Full-scale Fire Test

  9. GB/T521-1993轮胎外缘尺寸测定方法

    Method of measuring tyre peripheral dimensions

  10. 简要介绍航空轮胎充气尺寸、尺寸公差、胀大尺寸、与飞机相邻部件间最小允许间隙、并串装轮胎最小间隙及机轮与飞机相邻部件间距等的选取。

    The selections of the inflated dimension and dimension tolerance of aviation tire , the dimension of growth tire , the minimum permitted gap between tire and adjacent parts , the minimum gap between abreast tires and the space between wheel and adjacent parts are briefly described .

  11. 利用ISO9705标准的全尺寸实验装置对废旧轮胎进行全尺寸火灾实验研究。

    Full-scale experiments were conducted using the rig built according to ISO9705 standard to study the fire behavior of the abandoned-tyres .

  12. 允许的冬季轮胎和车轮尺寸。

    Permissible winter tyre and wheel sizes .

  13. 设计的轮胎充气外缘尺寸和成品性能等达到国标要求。

    The overall dimensions and performance of finished tire meet the requirements of the national standard .

  14. 轮胎充气外缘尺寸和耐久性能等达到设计要求和国家标准。

    The inflated overall diameter and endurance of finished tire are in accordance with the requirements of the design and the relevant national standard .

  15. 该轮胎的外缘尺寸符合国家标准要求,轮胎的高速性能和耐久性明显改善。

    The overall diameter of produced tire was in accordance with the relevant national standard , and the speed performance and endurance of tire were improved significantly .

  16. 成品性能检测证明,轮胎充气外缘尺寸、强度、耐久性能和高速性能均符合设计要求。

    It is confirmed by the test of finished tire that the inflated overall dimension , strength , endurance and speed performace are in accordance with the designed criteria .

  17. 富有运动气息的双排气口、低断面轮胎和宽大的尺寸让STS看上去动力更加强劲。

    Sporty details like dual exhaust outlets , meaty low-profile tires and a wide stance give the STS the look of a capable performance sedan , which in fact it is .

  18. 优化设计后轮胎的充气外缘尺寸、耐久性能和胎体压穿强度均达到了设计要求。

    The inflated overall diameter , endurance and plunger energy of the optimized tire met the design targets .

  19. 轮胎断面的轮廓尺寸直接影响到轮胎的受力、寿命、安全性,是决定轮胎质量的重要因素。

    The contour dimension of tires ' section affects their capability , life span , safety and comfort directly , which is the significant factor of tires ' quality .

  20. 成品轮胎室内试验表明轮胎充气外缘尺寸符合TRA标准和设计要求,且性能良好。

    It is confirmed by the in-door test of finished tire that the overall diameter of inflated tire meets the requirements of the TRA standard and the design , and the performance of test tire is very good .

  21. 以尺寸稳定型聚酯(DSP)和改性锦纶66帘线作为轿车和轻型载重子午线轮胎的胎体骨架材料,对比分析轮胎外缘尺寸和静负荷特性。

    The dimension-stable polyester ( DSP ) and modified nylon 66 cords were applied in the carcass ply of PCR tire and LTR tire , and the overall diameters and static loading capacities of test tires were compared .