胎面

tāi miàn
  • tread
胎面胎面
胎面[tāi miàn]
  1. 这些轮胎磨损得已低于胎面1.6毫米的法定厚度。

    The tyres were worn below the legal limit of 1.6mm of tread .

  2. 这种宽大的轮胎有很深的胎面花纹。

    The fat , broad tyres had a good depth of tread .

  3. DSP胎体轮胎尺寸稳定性好,均匀性好,但操纵性和胎面耐磨性比改性锦纶66胎体轮胎稍差。

    And DSP cord tire had better dimension stability and uniformity , but somewhat poorer handling quality and tread life .

  4. 全SR农业轮胎胎面胶的研制

    Development of all SR agricultural tire tread compound

  5. 对SSBR在载重斜交轮胎胎面胶中的应用进行试验研究。

    The application of SSBR to the tread compound of bias truck tire was investigated .

  6. NR/SBR胎面胶毛细管挤出流动中粘度的压力效应

    Presure effect of viscosity for nr / sbr blended tread in capilary extrusion flow

  7. PROFIBUS总线技术在胎面挤出联动线中的应用

    The application of Profibus to the tire tread extrusion production line

  8. SR胎面性能的改进

    Improvement of SR tread properties

  9. 基于Profibus现场总线的胎面定长裁断伺服控制系统设计

    Profibus-Based Servo Control System for Fixed Cutting of the Tread

  10. 研究烷基二硫代磷酸盐促进剂在NR胎面胶中的应用。

    The application of alkyl dithiophosphate accelerator in NR based tread compound was investigated .

  11. CEC在光面抗切割工程机械轮胎胎面胶中的应用

    Application of CEC in cut-resistant smooth tread of OTR tire

  12. 用毛细管流变仪,研究了NR/SBR共混胎面胶口型挤出流动中粘度对压力的敏感性。

    The sensitivity of NR / SBR blended tread rubber on pressure in capillary flow was studied .

  13. 采用ANSYS有限元分析软件对胎面双复合挤出机头流道内部的压力场进行模拟和分析。

    The simulation and analysis of the pressure distribution in head runner of double plex tread extruder were made with ANSYS FEA software .

  14. 以NR胎面胶探讨硫化胶微波脱硫过程中微波的非热效应。

    The non-thermal efficiency of the microwave during the devulcanization was investigated with a NR-based tread vulcanizate .

  15. 胎面(包括功能尖斜面)的平均切削力(0.45N)小于4个轴面的平均切削力(1.71N),差异有统计学意义(P<0.01)。

    The average cutting force ( 1.71 N ) of four axial surfaces was higher than that ( 0.45 N ) of occlusal surface ( including functional cusp inclines ) ( P < 0.01 ) .

  16. 用该产品试制的尼龙轮胎胎面胶和胎侧胶,其室内性能全部达到美国运输部(DOT)轮胎安全标准A级水平;

    All test properties of nylon tread rubber and sidewall rubber using this wax in room condition met the specification of DOT A grade .

  17. SSBR改善胎面胶动态力学性能的研究

    Study on the Dynamic Properties of Tread Compounds modified by blending SSBR

  18. 结果表明,以SSBR为主的胎面胶可保持较好的抗湿滑性能并可有效地降低胶料的滚动阻力;

    The result showed that the rolling resistance of tire compound was effectively decreased by using S SBR based blend without affecting the wet traction ;

  19. 对超细轮胎胎面胶粉在沥青改性方面作了实验阶段的研究,并将其与SBS、细鞋胶粉进行比较,指出用超细轮胎胎面胶粉改性沥青有较好的性价比。

    By comparison with SBS and shoe rubber powder , the article points out that ultra-fine tyre rubber powder modified bitumen has good cost performance .

  20. 新材料NWSiO2在胎面胶中应用及新结构带束层对轮胎性能影响仿真的研究

    Application of New Material NW SiO_2 in the Tread Rubber and Simulation of Affection of Belt Structure on the Performance of Radial Tire

  21. 试验研究液体IR(LIR50)在全钢子午线轮胎胎面基部胶中的应用。

    The application of liquid IR ( LIR50 ) in tread base of BTR tire was experimentally investigated .

  22. 新型胎面胶&集成橡胶SIBR

    Integral Rubber SIBR a Kind of New Tread Rubber

  23. Si69/白炭黑/炭黑补强体系对SIBR胎面胶性能的影响

    Influence of Si69 / silica / carbon black system on properties of SIBR tread

  24. SIBR用于胎面胶的研究进展

    Advance in study on SIBR used as treads

  25. 文章以胎面复合挤出联动线PLC控制网络为研究的背景,根据其控制网络的系统总体结构和性能特点,分析了胎面联动线PLC控制网络故障发生的类型、范围及原因。

    In the background of PLC controlling network of Tire Tread Extruding Line and according to system structure and performance of the line , this paper studies the types , range , and causes of the line .

  26. 用均匀设计方法研究了在选定变化范围内溶聚丁苯橡胶(SSBR)/BR、促进剂DM/D、炭黑/白炭黑的配比与SSBR/BR二元共混胎面胶物理性能的关系。

    The influence of S-SBR / BR , accelerator DM / D and carbon black / silica with different blending ratios on the physical properties of S-SBR / BR tread was investigated .

  27. 理想的胎面材料&集成橡胶SIBR(Ⅱ)集成橡胶的结构及性能

    AN IDEAL TIRE TREAD RUBBER & INTEGRAL RUBBER SIBR ⅱ . The structure and property of integral rubber

  28. 优化措施主要包括胎面采用纵向曲折花纹,花纹深度为12mm;

    12 mm tread pattern depth ;

  29. 为了提高胎面挤出联动线的控制水平,采用了CC-Link现场总线技术。

    In order to increase the control level for tread extrusion line , CC - Link site bus technique is adopted .

  30. 高性能胎面胶用集成橡胶SBR-BR-SBR

    Integral rubber SBR - BR - SBR in high performance tire