污泥负荷率

对污泥负荷率的探讨

The Discussion on Sludge Load Rate

文中对曝气池容积的计算方法&BOD5污泥负荷率法与污泥龄法进行了分析。

The calculative ways of aeration tanks ' volmes are analyzed ; the way dealing with BOD 5 sludge loading ratios and the one with sludge age .

引入SBR工艺处理酚氰废水，研究了曝气时间及污泥负荷对污染物去除率的影响。

The effect of aeration time and sludge loading are discussed .

本文在用表曝技术处理生活污水过程中进行理论分析的基础上，试验研究了曝气叶轮的转速、pH值、污泥沉降比、污泥负荷率等对生活污水处理效果的影响。

On the basis of theory analysis of treating domestic sewage by using surface aeration technique , this article tests the influence to the domestic sewage treatment by turning speed , pH valve of aeration impeller , sludge settlement ratio and . sludge load rate .

在内循环气升式间歇反应器对好氧颗粒污泥颗粒化过程进行了研究，从污泥负荷率和碳源特性分析了好氧颗粒污泥的稳定性。

The influencing factors on stability of aerobic granules were studied in sequencing batch airlift reactors .

比较了采用浸没式平片膜组件的膜生物反应器（MBR）与传统活性污泥工艺（CAS）处理市政污水时平均容积负荷率、平均污泥负荷率及各自出水BOD5/COD值；

Average volume load rate 、 average sludge load rate and the effluent value of BOD5 / COD of a Submerged-flat Membrane Bioreactor ( MBR ) and a Conventional Activated Sludge process ( CAS ) which were used in the treatment of municipal wastewater were compared .