吸入管

xī rù ɡuǎn
  • Suction pipe;suction tube
吸入管吸入管
  1. 液体经底阀6和吸入管进入泵内。

    Liquid through the bottom valve6and the suction tube into the pump .

  2. 离心泵吸入管流动特性研究

    Characteristics of Inlet Flow of a Centrifugal pump

  3. 修正了现有的自吸泵自吸时间与吸入管直径的关系式。

    The relation between the self-priming time and the diameter of suction pipe is modified .

  4. 将吸入管连接到发动机上。

    Connect suction line to engine .

  5. 附加应急舱底水吸入管

    Additional emergency bilge suction pipe

  6. 通常吸入管与滤清器是安装在一起的总成并属于油箱单元。

    The pickup tube and filter are usually part of an assembly that also incorporates a fuel-tank unit .

  7. 潜水泵的工作原理:潜水泵开泵前,吸入管和泵内必须充满液体。

    The working principle of submersible pumps : submersible pump pump before opening , suction pipes and pumps must be filled with liquid .

  8. 为此,必须重新安装连接到液压储罐的吸入管的液压泵吸入连接。

    To do this , the suction connection on the hydraulic pump for the suction pipe to the hydraulic reservoir must be refitted .

  9. 吸入管内未充满液体时,泵通过自动抽气作用排液,适应于从地下容器中抽提液体。

    Inhalation tube not filled with liquid , the pump through the role of automatic exhaust fluid , adapted to extract from the ground container liquid .

  10. 油箱必须装备以下元件:加油管、油箱通风系统、吸入管、滤清器和油量传感装置。

    The main fuel tank must have all the following : a filler tube , a ventilation system , fuel pickup tube and filter , plus a gauge-sending unit .

  11. 水泵吸水池内部的流动状态非常复杂,特别是在吸入管的周围,分布十分复杂的漩涡,这些漩涡的存在对整个系统的流动状态会产生众多的影响,有可能使泵站的性能恶化。

    The flow conditions in the pump suction sump are very complex , there are kinds of vortices in and around the pump bell , these are common problems , which lead to poor pump performance .

  12. 盖内与量杯盖密合,再将药水吸入喂药器的管内,此时量。

    Into the cup and empty the medicine by pumping it into the tube .