可靠性分析

卡尔曼滤波可靠性分析及其在动态GPS定位中的应用

Reliability Analysis for Kalman Filtering and Its Application in Kinematic GPS Positioning

N版本编程技术的软件可靠性分析

Reliability Analysis of N - Version Programming

IP协议与因特网可靠性分析

The Analysis Of IP and Internet reliability

GO法是以成功为导向，与故障树方法完全不同的一种全新概念的可靠性分析方法。该文研究GO法的原理及其应用，系统归纳了GO法，阐明了GO法的原理。

This paper provides an advanced GO method for quantification of system reliability and describes the principle and application of the GO methodology .

基于ANSYS的高层建筑位移控制可靠性分析

Reliability analysis on the displacement control of high-rise building based upon ANSYS

基于ANSYS的复合材料蜂窝结构可靠性分析

Honeycomb structural reliability analysis of composite meterials with ANSYS

基于Petri网的非串行制造系统的可靠性分析

Reliability Analysis of Non-series Manufacturing Systems Based on Petri Nets

Latin超立方采样技术及其在结构可靠性分析中的应用

Latin hypercube sampling and its application to structural reliability analysis

一种IC测试系统的可靠性分析与改进设计

IC Testing System Reliability Analysis and Improving Design

在役DCS运行性能评估与可靠性分析

The Performance Evaluation and Reliability Analysis for DCS in Service

提出了GO法可靠性分析软件的设计要求，给出软件的总体框图及软件实现方法。

It provides a designed requirement of GO methodology reliability analysis system . In addition to the software frame , the actualizing methods are presented in detail .

寿命服从极小值分布的MIS的软件可靠性分析

Reliability Analysis Made on MIS Software with an Operation Life Submitting to Minimum Distribution

UPS并机供电运行可靠性分析

The reliability Analysis of UPS Parallel Machine Power-Supply Running

UPS配电系统的可靠性分析

UPS Distribution System Reliability Analysis

FMS任务可靠性分析模型

FMS Mission Reliability Analysis Model

随机应力谱下构件疲劳可靠性分析的Miner准则&寿命分布函数法

Miner 's RULE-LIFE distribution function method for fatigue reliability analysis of component under random stresses spectrum

RPR容错功能的可靠性分析

Reliability Analysis of Resilient packet Ring With Fault-Tolerant Technique

结合影响两者分布的因素，建立了FA传动摆线轮齿面接触疲劳强度可靠性分析计算的数学模型。

Combining the factors of contact stresses and strength distributions , a mathematic model is established to analyze and calculate the cycloid gear reliability .

通过可靠性分析，F3是结构改进的最佳方案，能够满足目前缸盖的使用要求。

Through reliability analysis , F3 is the best proposal operation requirement of current cylinder head .

由于系统可靠性分析中的NP困难，传统方法在处理大型复杂可维修系统可靠性问题时将面临计算量过大的问题。

Due to the NP-hard problem , traditional methods when used to analyze reliability of grand complex maintainable faced the problem that calculation is extremely large .

本文提出了一种用于系统可靠性分析的扩展的对象Petri网模型（GOOPN）。

An generalized object oriented Petri net ( GOOPN ) for system reliability analysis is presented in this paper .

层合板作为一个系统考虑，其可靠性分析含以下几个步骤：（1）随机载荷和强度参数作为随机变量，利用一次二阶矩法（FirstOrderReliabilityMethod，FORM）分析单层板的失效概率。

The load and strength variables are considered as random variables and the first order reliability method ( FORM ) is used to compute the failure probability of plies . The laminate 's reliability is evaluated by utilizing the system reliability theory together with the significant failure sequences concept .

长春城郊10kV农网现状及供电可靠性分析

Present Situation of 10 kV Rural Lines and Analysis on Rural Service Reliability of Changchun Outskirts

数据匮乏与可用性差是长期困扰人因可靠性分析（HRA）的一大难题。

The lack of data and availability is a major problem that embarras se s human reliability analysis ( HRA ) for a long time .

首先采用解析法对变电站电气主接线进行可靠性分析，然后采用MonteCarlo模拟法对整个输电网进行故障采样模拟，最后得到整个输电网的可靠性指标。

First , this paper uses the analytical method to analyze the reliability of substation bus arrangement then simulates the unit fault in the whole transmission network by Monte-Carlo Simulation method , and at last obtains the reliability index .

本文方法和MonteCarlo法的计算结果进行了比较，证明了这种方法在求解钢框架结构可靠度问题时的可行性，并为以后基于可靠性分析的优化设计方法研究提供有价值的参考。

Through compare the result of the PNET Method and Monte Carlo Method , It prove feasibility in calculate the reliability analysis of semi-rigid node steel frame . It is also provided availability reference based on the reliability optimizes design .

单元层可靠性分析时，取初始缺陷、强度参数为随机变量，采用一阶矩法和Tsai-Wu准则分析每个单元层的失效概率。

In the reliability analysis , the initial imperfection , strength parameters were treated as random variables .

用模式识别中的Fisher方法对mb/MS判据进行研究，给出了定量的全球普适的识别方程，并进行了可靠性分析。

We try to give a quantitative and global discrimination function by studying m_b / M_S data using Fisher method that is a kind of pattern recognition method . The reliability of this function is also analyzed .

当概率疲劳S-N曲线以特定存活概率（P）和置信度（C）的方式给出并无法重做试验时，除特定P-C外无法做其它概率水平的可靠性分析。

When the historic probabilistic S-N curves were given under special survival probability and confidence levels and there is no possibility to re-test , fatigue reliability analysis at other levels can not be done except for the special levels .

在对软件测试V模型作了深入分析后，在V模型的基础上又提出了一种新的测试模型，使之能覆盖整个软件开发和使用过程，为进行各阶段的软件可靠性分析提供数据。

After analyzed the V software test model , also proposed in V model foundation one kind of new test model , enables it to cover the entire software development and the use process , for carries on various stage the software reliability analysis to provide the data .